Weidmuller AMF 6/10 Bedienungsanleitung Seite 4

English
en
1
A. Clamping jaws
B. Grub screw for locking adjustment dial into position
C. Adjustment dial for depth of blade
2 D. Blade head
E. Blade
3 Open the clamping jaws.
Remove blade head assembly.
4
Determine blade setting
5 Adjusting the blade
6 Circular cut to strip insulation
7 Cut edge of insulation by circular cut
8 Cut edge of insulation by longitudinal cut.
9 Position of blade for longitudinal cut.
10 Position of blade for circular cut.
11 Breaking open the pierced insulation.
12 Changing the blade
I. Unscrew grub screw approx. 3 mm.
II. Remove adjustment dial.
III. Press out pin
IV. Replace blade. When replacing blades, use blade protection included
in the spare parts set.
V. Reassemble in reverse order.