Technical Specifications; Maintenance / Care - Würth ERGOPOWER SENSOR PETITE 2W LED Originalbetriebsanleitung

NOTES REGARDING OPERATION
The switched-on lamp is very bright and the lamp
may get hot in the vicinity of the light outlet. When
the lamp is switched on:
• do not look directly into the light outlet.
• ensure that nobody is exposed to glare.
• do not cover the light outlet.
• do not put down the lamp with the light outlet
pointing downwards.

Technical Specifications

Art.
Number of LEDs:
Battery specification:
Lamp input voltage/
current consumption:
Charging time:
Operating time
LED intensity
Service life of LED:
Degree of protection:
Storage temperature:
Operating temperature:

MAINTENANCE / CARE

Visual inspection before starting work
The lamp is maintenance-free. The lamp and its acces-
sories must nevertheless be checked for external dam-
age before each use.
The lamp may not be used when damage
is visible. It must be repaired or disposed of by a
commissioned and trained person. Please contact
your Würth branch.
Cleaning
Cleaning work may only be performed when the
been disconnected. Clean the lamp by wiping it with
a soft, clean cloth. Remove stubborn dirt with a mois-
tened cloth and a common household cleaner. Using
cleaning agents that are abrasive or contain alcohol
or solvent will damage the housing.
10
0827 809 634
1, 2 W
Li-Polymer, 3.7 V,
600 mAh, 2,22 Wh
5 V 1 A
approx. 2.5 hours
2 hours - high light mode,
4 hours - low light mode
200 lm - high light mode,
100 lm - low light mode
up to 50,000 hours
IP 65
–20 °C to +50 °C
–10 °C to +40 °C
DISPOSAL
Do not dispose of the lamp with domestic
waste!
Small electrical devices and packaging must
always be recycled in an environmentally
appropriate manner. Electrical tools that are
no longer usable must be separately col-
lected and forwarded for environmentally appropri-
ate recycling according to the European Directive
2012/19/EU.
WARRANTY
(proof by invoice or delivery note) for this lamp. A
damaged lamp is either repaired or replaced with
a substitute lamp. Damage resulting from improper
handling is excluded from the warranty. Complaints
can only be accepted if the lamp is handed over
assembled to a Würth branch, your Würth sales rep-
resentative or a Würth-authorised customer service
centre.
9