Description Of The Display - Zibro A 45 Gebrauchsanweisung

DESCRIPTION OF THE DISPLAy

1
Picture 8
1. Shows the set ventilator capacity. The ventilator capacity can be set by pressing But-
ton 1 (Figure 4) or Button 4 on the remote control (Figure 5). By pressing this button
repeatedly the capacity of the ventilator will cycle from SLEEP to LOW to MEDIUM and
to TURBO and back to SLEEP again.
Sleep
2. SLEEP MODE; can be set using the remote control by pressing Button 5 or button 1 of
the control panel until icon 2 lights up. The ventilator will switch to a low capacity so
that the air cleaner becomes whisper quiet.
3. Remote control receiver.
4. Indicator light 4 hast multiple functions, depending on the colour of the icon.
a. Light blue: air cleaner is plugged in, air cleaner is in standby-mode.
b. Blue: air cleaner is in operation, unit can be switched off using button 1 on the re-
mote control or by pressing button 2 of the control panel.
c. Green/blue: child lock is activated. Settings cannot be modified. Child lock can only
be inactivated by pressing button 2 of the remote control.
d. Blue flashing: filter needs to be replaced. See chapter "Replacing the filter pack-
age".
5. Indicates that the timer function is switched on. The air cleaner will automatically be
switched off when the time set has elapsed. The timer function can be set by pressing
Button 6 on the remote control. By repeatedly pressing Button 6 the time to be set will
cycle from 1 hour to 4 hours and then to 8 hours. By pressing Button 6 again the timer
function will be switched off again.
6. Indicates that the air cleaner is in AUTO MODE. The auto mode can be switched on and
off by pressing Button 3 on the remote control and the control panel. The air cleaner
will now determine the ventilator capacity automatically depending on the amount of
pollution in the air to be cleaned. The table below shows which colour will light up at
the measured air quality and at what speed the ventilator will operate.
G
If the device is switched off then all settings will be lost.
good air quality
Colour indicator Blue
light
Fan speed Sleep
Table 1
2 3 4
lOw med
average air quality
Purple
Low
5 6
TURBO
Bad air quality
Red
Medium
4
47 47