Zibro A 45 Gebrauchsanweisung Seite 45

•
•
•
•
•
•
•
•
•
•
•
•
G
INSTALLATION
1.
2.
3.
4.
5.
Picture 3
G
Never allow the device to come into contact with chemicals.
Never submerge the unit in water.
Do not insert objects into the openings of the unit.
Always remove the plug from the electric power supply before cleaning or replacing
the unit or components of the unit.
Never use an extension cable to connect the device to the electric power supply.
Children should be supervised to ensure that they do not play with the appliance.
Have any repairs only carried out by a recognised service engineer or your supplier.
Always remove the plug of the unit from the wall socket when it is not in use.
A damaged power cord or plug must always be replaced by a recognised electrician or
your supplier.
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
ATTENTION!
Never use the device with a damaged power cord, plug, cabinet or control panel.
Never trap the power cord or allow it to come into contact with sharp edges.
ATTENTION!
Failing to follow the instructions may lead to nullification of the guarantee on
this device.
Remove the back panel. Place both hands on the rounding at the bottom side of the
back panel. Release the back panel and remove it (picture 3).
Remove the filter package (4x) from the unit and remove the plastic packaging mate-
rial.
Place the filter package (4x) back in the unit with the white front filter facing to the
side.
Put the back panel back by first hanging the top edge of the back panel on the two
hooks at the top of the air cleaner and then fixating it by pressing the bottom part of
the back panel.
The device is now ready for use.
• To ensure that it functions properly the filter package must be inserted cor-
rectly and such that the front filter (white side) is positioned towards the outer
side and the active carbon filter (black side) is positioned at the inner side.
• For the device to work correctly the air flow must first go through the front
filter, then through the HEPA filter and then through the active carbon.
4
45 45