Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BEFORE USE READ THESE INSTRUCTIONS AND RETAIN FOR FUTURE REFERENCE
INTRODUCTION
The following instructions contain important information about
the machine and safety advice for the operator. Equipment must
be operated, serviced and maintained in accordance with the
manufacturer's instructions. If in doubt contact the supplier of
your machine.
Read all instructions before using the
machine
PRODUCT INFORMATION
These commercial floor treatment machines are designed for
the scrubbing of hard floors. The machine is intended for
commercial use, for example in hotels, schools, hospitals,
factories, shops, offices, rental businesses and other than normal
housekeeping purposes.
TECHNICAL SPECIFICATIONS
Model
Product Code
Charging Voltage AC (~)/
Frequency
Battery Voltage DC
Battery Details
Motor Power
Run Time
Charge Time
Pad / brush speed
Pad / brush diameter
Sound pressure level
Dimensions (L x W x H)
Weight of batteries and
harness
Weight of machine
Warranty
•
Above dimensions are approx. Since the company's policy
is to continuously improve the product, there could be
changes without prior notice.
•
Handle vibration does not exceed 2.5 m/s² when operating
on a smooth hard surface.
•
Noise levels measured at a distance of 1 metre from
machine and 1.6 metres above floor, when operating on a
hard floor. Measurements recorded using a hand held
meter.
2
Orbis MotorScrubber
20
OMS20320
V/Hz
100 - 240 / 50 - 60
V
12
Ah
7.0
W
48
hrs
4
hrs
12
rpm
320
cm
20
dB(A)
60
cm
20 x 20 x 135
kg
3
kg
2
1 year subject to
conditions
IMPORTANT
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
(WEEE)
DO NOT dispose of this device with unsorted
waste. Improper disposal may be harmful to the
environment and human health. Please refer to
your local waste authority for information on
return and collection systems in your area.
EC Declaration of Conformity
Machine Type: Rotary Floor Cleaning Machine
Model: OMS20320...,
This machine is in conformity with the following EU
directives:
•
Machinery Directive
•
The EMC Directive
Applied harmonised standards:
BS/EN60335-1, BS/EN60335-2-67, BS/EN55014-1,
BS/EN55014-2, BS/EN61000-3-2, BS/EN61000-3-3,
BS/EN62233,
Truvox International Limited
Unit C (East), Hamilton Business Park,
Manaton Way, Botley Road,
Hedge End, Southampton,
SO30 2JR, UK
IMPORTANT SAFETY ADVICE
The safety information described in this manual provides basic
precautions and supplements standards in force in the country
where the machine is used.
This symbol warns the operator of hazards and unsafe
practices which could result in severe personal injury
or death.
WARNING – to reduce the risk of injury,
electric shock or fire.
1. This machine must only be used for the manufacturer's
approved application as described in this manual.
2. The machine must be unpacked and assembled in
accordance with these instructions before connecting to
the electrical supply.
3. Only genuine accessories and spare parts provided with the
machine or those approved by the manufacturer should be
used.The use of other accessories may impair the safety of
the machine. All repairs must be performed by a qualified
service agent.
4. DO NOT modify the machine from its original design.
5. Operators must be fully trained in the use of the machine in
accordance with these instructions, able to perform regular
user maintenance and the correct selection of accessories.
6. Operators should be physically capable to manoeuvre,
transport and operate the machine.
7. Operators should be able to recognise unusual operation of
the machine and report any problems.
8. This machine is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge,unless
they have been given supervision or instruction concerning
use of the machine by a person responsible for their safety.
2006/42/EC
2014/30/EU
Malcolm Eneas
Operations Director
Southampton, 19/07/2021
07-21
Werbung
Inhaltsverzeichnis
