Bright 021126 Bedienungsanleitung Seite 16

EN
The overheating protection automatically switch-
es off the shoe drier in the event of overheating.
Follow the instructions below if the overheating
protection trips.
1. Pull out the plug.
2. Remove the cause of the overheating (e.g.
obstruction of air flow, fluff etc.).
3. Allow the shoe drier to cool for a few min-
utes. Start the shoe drier again.
MAINTENANCE
CLEANING
Check the shoe drier at regular intervals.
• Pull out the plug and check if there is any
dust or fluff in the shoe drier.
• Clean the outside of the shoe drier with a
damp cloth, and vacuum clean the grille if
necessary.
16