Safety Instructions; Technical Data - LAPP MODE3 2.0 Bedienungsanleitung

SAFETY INSTRUCTIONS

• Children must not use the cable assemblies/charging
cable!
• Keep animals away from the cable assemblies/charg-
ing cable.
• Only connect the cable assemblies/charging cable to
the designated and labelled plugs and sockets.
• Do not use adapters, conversion adapters or cord
extension cables.

TECHNICAL DATA

Cable assemblies/charging cable Mode3
(type 2 to type 2, IEC)
Rated voltage (type 2 to type 2, IEC)
Nominal frequency
Rated current type 2, IEC
Charging capacity type 2, IEC (20A) 1-phase
„M32-T2Pm-T2Cm-swsw-S-20A1P-xxxx"
Charging capacity type 2, IEC (20A) 3-phase
„M32-T2Pm-T2Cm-swsw-S-20A3P-xxxx"
Charging capacity type 2, IEC (32A) 1-phase
„M32-T2Pm-T2Cm-swsw-S-32A1P-xxxx"
Charging capacity type 2, IEC (32A) 3-phase
„M32-T2Pm-T2Cm-swsw-S-32A3P-xxxx"
IP Protection type 2, IEC
Ambient temperature
Storage temperature
Humidity
• The use of the cable assemblies/charging cable is
not permitted in explosive environments or in rooms
containing flammable liquids, gases or dusts - risk of
explosion and fire!
• Operate cable assemblies/charging cable only under
the intended ambient or storage conditions.
Standard IEC 61851-1
Standard IEC 62196
250 V AC 1ph
440 V AC 3ph
50 Hz/60 Hz
20A / 32A
4.6 kW
13.8 kW
7.2 kW
22 kW
IP55 (plugged)
-35°C ...+50°C
-5°C ...+50°C
5 – 95% (non condensing)