4. Connect the plug into a power outlet.
5. Press the heat button once, the working indicator will light up. Then the appliance
will start to work. Once the temperature of milk has achieved the setting value,
appliance will stop working.
NOTE: During operation, you can stop operating by pressing the heat button once.
6. When the appliance has stopped operating, open the lid, pour out the warmed and
frothed milk to enjoy it.
WARNING: Minimum 3 minutes rest time must be maintained
between two continuous cycles, otherwise, the appliance
will enter self-protection state automatically after working
for 5 cycles continuously, the working indicator will flash
and the switch button will not be activated, after about
5 minutes, the appliance will enter standby state and you
can continue operating the appliance.
7. Always disconnect the power supply when not in use.
ONLY FROTHING SEPARATELY, WITHOUT HEATING
1. Follow steps 1–7 above.
2. Press the froth button once, the working indicator will illuminate, the frothing
whisk will rotate for frothing milk separately, but the heating element will not heat.
And the appliance will automatically stop rotating after operating.
NOTE: During operation, you can stop operating by pressing the froth button once.
3. When the appliance has stopped operating, open the lid, pour out the frothed milk
and enjoy it.
ONLY HEATING SEPARATELY, WITHOUT FROTHING
1. Place the appliance on a flat surface.
2. Select mixing whisk according to your task. Then open the lid, insert the mixing
whisk onto the shaft on the bottom of jug.
NOTE: The max. milk quantity permitted to add is 300 ml (see Fig. 1), to avoid
milk overflowing after mixing. The min. milk quantity permitted to add is 75 ml.
3. Press the heat button once, the working indicator will light up. Then the appliance
will start to work. Once the temperature of milk has achieved the setting value,
appliance will stop working.
4. When the appliance has stopped operating, open the lid, pour out the warm milk
and enjoy it.
5