Get Started - RUSTA 903014070101 Gebrauchsanweisung

GET STARTED!

• Before using your milk frother, clean all the parts according to the section
"CARE AND CLEANING".
IMPORTANT: Do not wash any parts in the dishwasher, and do not immerse the
jug in water. This may permanently damage the product and void the warranty.
• The appliance is equipped with mixing whisk and frothing whisk, the mixing whisk
is used for mixing milk during heating to prevent from sticking. The frothing whisk
is used for frothing milk during heating or is used for frothing separately, but no
heating. Select desired accessory according to your task.
• The amount of milk to be heated or frothed shall be complied with the requirement
shown in Fig. 1.
NOTE: The max capacity of the jug is 300 ml.
USE
FROTHING AND HEATING MILK
1. Place the appliance on a flat surface.
2. Select frothing whisk according to your task. Then open the lid, insert the frothing
whisk into the shaft on the bottom of jug.
3. Fill the jug with the desired amount of milk, and replace the lid.
NOTE: The max. milk quantity permitted to add is 150 ml (see Fig. 1), to avoid milk
overflowing after frothing. The min. milk quantity permitted to add is 75 ml.
4
Maximum capacity for heating milk (300 ml).
Maximum capacity for frothing milk (150 ml).
Minimum capacity for heating or frothing milk (75 ml).