Herunterladen Inhalt Inhalt Diese Seite drucken

Using The Memory Card Slot; Installing The Memory Card; Removing The Memory Card; Using The Touchscreen - Werock Rockbook X500 Serie Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Using the memory card slot

Installing the memory card

Different types of SD memory cards have different capacities. Nevertheless, the form factor is the same for
all of them. SD cards can have a storage capacity of up to 4 GB, SDHC cards up to 32 GB and SDXC cards
up to 2048 GB. The computer has a card reader that is suitable for SDHC or SDXC cards.
1. Orient the card so that the contact points are facing the slot and pointing up.
2. Carefully slide the card into the slot. If the card does not slide in without applying pressure, change its
orientation slightly.
3. Push the card in until it clicks into place. The card will protrude a little from the slot.

Removing the memory card

1. Click on the "Safely Remove Hardware and Eject Media" icon in the taskbar.
2. Click on the memory card you want to remove
3. Open the port cover
4. Press lightly on the SD card to unlock it.
5. After that you can pull out the card

Using the touchscreen

Using the touchscreen
Some models are equipped with a capacitive touchscreen. This type of touchscreen responds to objects
that have conductive properties, such as fingertips and a stylus with a capacitive tip. You can navigate the
screen without using a keyboard, touchpad, or mouse.
The following table shows how to use the touchscreen to obtain corresponding mouse functions.
CAUTION: Do not use pointed objects such as pens or pencils on the touchscreen. Otherwise, the surface
of the touchscreen may be damaged. Use your finger or the supplied stylus.
Gesture
Tap: Tap the touchscreen once
Double tap: Tap the screen twice in direct succession
Tap and hold: Tap and hold until a popup menu appears
Drag: Hold your finger on the screen and drag across the screen until
you reach your destination
Multi-Touch Gestures
You can interact with your computer by placing two fingers on the screen. Moving your fingers across the
screen creates "gestures" that you use to send commands to the computer. Here are the multi-touch
gestures you can use:
Gesture
Action
Scroll
Drag 1 or 2 fingers up or down.
Rockbook X500 Series User Manual
79 / 96
Function
Single click
Double-click
Right mouse click
Drag
Description
Scrolling allows you to see a
different part of a page the
scrollbars has.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Rockbook x540Rockbook x550Rockbook x550 g2

Inhaltsverzeichnis