Redroad G10 Bedienungsanleitung Seite 13

Operation
Equipment recharge
When the vacuum-mop completes cleaning, it will automatically
recharge, and determine whether to clean the mop according to the
cleaning mode;
The vacuum-mop is outside of the station, press the "
vacuum-mop for a short period of time to start recharging. After
recharging successfully, judge whether to clean the mop according to
the cleaning mode.
Mop cleaning
In the process of sweeping and mopping, the vacuum-mop will
automatically return to the cleaning station to clean the mop midway;
after cleaning is completed, the vacuum-mop will automatically return to
the interruption point to continue sweeping and mopping;
In the process of sweeping and mopping, press the "
cleaning station for a short period of time, and the vacuum-mop will
return to the cleaning station and clean the mop;
After sweeping and mopping, the vacuum-mop will automatically return
to the cleaning station to clean the mop; after cleaning, enter the
stand-by state;
In the process of sweeping and mopping, press the "
vacuum-mop for a short period of time, and the vacuum-mop will start
recharging and automatically clean the mop, and then enter the
stand-by state after cleaning;
In stand-by state in the self-cleaning station, press the "
the self-cleaning station for a short period of time to clean the mop.
After cleaning, it will enter the stand-by state.
Water adding or pouring in fresh water tank
Please fill the fresh water tank with fresh water before the sweeping
and mopping robot works.
Please pour out the water in the dirty water tank and clean it up after
" button of the the sweeping and mopping robot works.
Note: It is forbidden to use cleaning products such as detergent, disinfectant
and solid detergent to avoid corrosion and damage to the equipment.
Breakpoint resume
This product has the function of breakpoint resume. During the cleaning
process, when the power is low, the vacuum-mop will automatically find
the cleaning station to charge, and after charging, it will return to the
breakpoint to continue cleaning. If the cleaning is manually finished or
the vacuum-mop is moved or operated during recharging or charging,
this breakpoint resume will be canceled.
" button of the
Scheduled cleaning
User can schedule a cleaning task in App, and vacuum-mop will start
the cleaning task as scheduled and return to cleaning station upon end
of the task.
Note: Any scheduled cleaning task will not be executed during the time
when non-disturbance mode is activated.
" button of the
Virtual Wall/ Restricted Area
User can define virtual wall/ restricted area in App which main machine
will avoid cleaning.
" button of
Notes:
• Before using this function, you have to store a map in the App.
• Moving the main machine or change of indoor environment may
cause the original map lost and any virtual wall/ restricted area
unavailable.
10