Wellcare WE-167CPHD Gebrauchsanleitung Seite 15

and normally.
Red light and Beep Sound – Possible
•
malfunction or overheating, switch off the
appliance immediately.
In the following situations, the red light and beep
sound will come on to indicate warning :
When the power is on but detachable plug-in
•
connector (6) is not connected properly: there
will be beep sound every second with the red
light on. Please connect the detachable plug-
in connector (6) to the connection box (7) and
switch on the controller again.
When the critical components are damaged:
•
there will be continuous beep sound with the
red light on. Please disconnect the mains cable
from wall outlet immediately.
When the heating wires or other components
•
are broken and the device cannot work
anymore : there will be beep sound every
second with the red light on.
When the heating pad (8) is folded or covered
•
by objects, such as pillows and blankets, which
cause an overheating concern, the device will
beep every 2 seconds with the red light on.
Please switch the heating pad off and make
sure the pad is flat and/or remove the objects
that are on top of the pad. You may switch the
heating pad back on again after the pad cools
down.
The warnings mentioned above cannot cover
all defective situations as the damages on some
components will not lead to red light or beep
sound.
GB
15