Topcom bpm wrist 3311 Gebrauchsanweisung Seite 8

TOPCOM BPM Wrist 3311
3. When the right level is reached, the cuff will deflate.
This monitor will re-inflate automatically to approximately
220mmHg if the system detects that your body needs more
pressure to measure your blood pressure.
4. When the measurement is completed, systolic, diastolic and
pulse will be shown simultaneously on the LCD screen.
5. When a mistake was detected during measurement the Error
icon appears on the display
13 Memory
The BPM 3311 has 3 Memory zones. Each can store up to 30
measurements including the date and time
The result will be stored automatically in the selected Memory Zone
after the measurement.
Select the desired Memory Zone before measurement, by pressing
the SET button repeatedly.
To recall measurement results:
• Press the SET button repeatedly to select the desired memory
zone.
• Press the MEMORY RECALL button to see the last
measurement result.
• Press the MEMORY RECALL button repeatedly for prior values
stored.
• To stop reading the data, press the START/STOP button to
switch back to normal time.
To erase all data from one memory zone:
• Press the SET button repeatedly to select the desired memory
zone.
• Press the MEMORY RECALL button to see the last
measurement result.
• Press the MODE and SET button simultaneously to erase all
data from the selected memory zone.
8