Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk
Backrest
Shopping
bag
Front
rotating
castors
Set up description
•
Check with the list from above if nothing is missing. If you'd discover at that stage that some part is missing
or damaged, do not continue assembly process. Contact your supplier of the product right away.
•
Put the rollator with it's wheels on the floor.
•
Grab both seat tubes and simultaneously push them down until you'll hear the "click" sound of locking
mechanism of the frame in open position. Try to pull frame folding strip up to fold the frame. If it is
impossible to do, the frame is opened and secured correctly. See the rollaror in "OPEN" status in the figure
above.
•
Always ensure the frame is stable and fixed when the rollator is opened.
•
Adjust both push handles to the same height. Usually the correct setting is adjusted if the handles are on the
level of user's wrists when standing with arms down along the body.
Loosen fixing levers located under the push handles. Then set the handles to required height. Both handles
•
should be set to the same height. Tie the fixing knobs on the handle tubes.
•
Make sure that the fixing levers (2 pieces) are securely locked so that the rollator is stable and parts can not
move when forced.
•
Always test to see that the rollator and attachments are properly and safely locked in place BEFORE using.
•
Failure to follow these warnings can result in personal injury.
Folding description
•
To fold the rollator press down with your right hand frame lock lever located under the right seat tube (see
picture). At the same time pull the frame folding strip up. The rollator should fold amost automatically.
•
You can secure the device in folded position with folded frame hook placed at the rear end of right seat tube.
Attache loose end of the hook to the left seat tube. Before opening the rollator back you must unattach the
folded frame hook.
Function description
•
Adjust the height of the push handles so that when the user's arm is down along the body, the supports are
at wrist height. Adjust the height by releasing the fixing knob located under the handle tube. Then adjust
handles to your desired height, then tie the fixing knob securely. Repeat the steps for the other support, so
both are at the same height.
•
Care should be taken to ensure that ALL adjustments are secured and that castors and moving parts are in
good working order before using.
•
To stop the rollator simply pull the brake handles back towards hand grips and hold brake handles in the
"BACK" position to remain in position. TO MOVE release the brake handles.
•
To lock the brakes in "engaged" position push the brake handles forward until you can hear the "click"
sound. To unlock the brakes pull the brake handles back until you can feel them loose.
•
While using the rollator in a stationary position, the hand brakes MUST always be locked. You should always
engage the breaks when you don't plan to move the device. Never leave device without breaks engaged
when there is someone sitting in it! Never leave device on slopes without breaks engaged!
Rev. 15.12.21
12 - 24
Push handle
Brake handle
Seat with tray
Handle height
adjustment
fixing levers
Rear wheel
UM-312075-77-multi 15.12.2021.odt
Werbung
