Ausek DL-24H Bedienungsanleitung Seite 7

Clear all branches and other debris away of the camera's front side so that you do

not to block the camera lens or PIR sensor.OR this will cause false pictures
caused wind or high temperature days.
You can avoid false triggers,you should adjust it,depend on the object or wild

animals' size,movement speed and distance.
Make sure to insert the Class 10 SD card before setting up the camera.And format

the SD card through the camera's menu.
Make sure that time and date is correct.

Make sure to switch the camera to "ON" mode (before you leave the area).

Common questions and answers
Question: How many batteries are required for the operation of camera?
Answer:8 x 1.5V AA battery.
Question: Are rechargeable batteries allowed?
Answer: No，because, rechargeable batteries are normally 1.2V,not enough
battery to support the camera to work long hours.
Question: Why we sometimes shoot blank photos with no mobile targets in it?
Answer: The PIR sensor is very sensitive so that it will be triggered by some
environmental factors such as a piece of falling leaf when the setting is at high
level, so it is strongly recommended that the setting should be made at the
medium level.
Question: Why some photos taken at night are very dark, which seems that the
IR LEDS were not working?
Answer: The IR LEDS have a high power consumption and will become
malfunctioning when the power of battery pack goes down. This problem can
be solved by replacing the batteries.
Question: Why only photos are produced when the setting is for both photos
and videos?
Answer: There is a heavy power consumption when the video function is
started and the camera will only shoot photos with no videos if the power of
battery pack goes down. Please change batteries to ensure the camera work to
the setting.
Example:Mounting
- 6 -
120°
90°
YES
120° total PIR angle