Camera Installation - Ausek DL-24H Bedienungsanleitung

Code
1 Mode
PIR Interval
2
3
PIR Level
Infraed Lamps
4
Capture Num
5
Video Length
6
7
Video Size
Language
8
9 Set Clock
Stamp
10
11
Photo Size
12 Software
Audio Recording
13
14 Time Lapse
Timer Setting
15
16 Camera Name
Security Code
17
18 Default
Time Lapse、Timer Setting attentions:
1.When "Timer Setting" is separately turned on, camera works in the setting time range
of "Timer Setting" while stands by in the time out of this period.
2.When "Time Lapse" is adjusted to "ON" mode, the default mode of "Timer Setting" is
"ON", with a time range of 0 o'clock ~24 o'clock, during which camera works in "Time
Lapse" mode. If the working time of "Time Lapse" needs to be changed, setting should
be made in "Timer Setting".
3.If the start time set in "Timer Setting" is earlier than the current time, camera will start
to work at the set time of the next day.

Camera Installation

Once all program settings have been setup properly,the camera isready for filed use.
Listed below are some helpful pointers on how to use your camera to get the best
results:
Mount the camera about 0.5-2m high with the camera pointed at a slight

downward angle.
Mount the camera facing north or south NOT east or west due to the rising and

setting of the sun could produce false triggers and overexposed images.
MENU
Photo / Video / Photo+video
2 s / 5 s / 10 s / 15 s /30 s/ 1 min / 3 min /
5 min / 10 min / 15 min / 30 min
Middle / Low / High
Hunting/Security
1/2/3
English, Francais, Deutsch, 日本語, Español
Settings
10s, 20s, 30s, 1min, 2min, 5min
720P, 1080P, VGA, WVGA
YY/MM/DD 00:00
Yes/No
5M/8M/12M/16M
Software version number
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
Yes / No
- 5 -