Automatic Mode - Purmo Fcir Bedienungsanleitung

Automatic mode

Turn the dial to AUTO.
Time
Measured
temperature
Absence mode
Comfort or economy
manual mode
(up to program change)
When starting up, the temperature measured by the thermostat is
displayed (the symbol appears above the ° C).
i
Press the button
• The temperature display can be reversed (CF02 start up menu):
— automatic mode: set-point temperature,
i
— press : measured temperature.
• If you do not want to use a program, you can go to continuous Economy
mode (dial turned to ), continuous Comfort mode ( ) or continuous
Frost Protection mode ( ).
to display the set-point temperature.
Current setting
(e.g. comfort)
Day
Heating demand
mode
Forced operation
(from 30 minutes to 4 hours)
39