Starting Up - Purmo Fcir Bedienungsanleitung

Starting up

After installation you need to program initial
settings. Turn the dial to the off position and
press the right-hand button for 5 seconds
until H600 code appears (maintenance menu
reserved for the installer).
Press OK.
5 sec.
The screen displays CF01.
CF01 — Correction of room temperature
measurement.
If there is a difference between the room
temperature and the temperature indicated
by the programmer, it is possible to correct it
(from -4° C to +4° C in steps of 0.1° C).
Press + or – to change the value, OK to con-
firm it and go to the next menu.
30