Hama DIR3020BT Kurzanleitung Seite 5

1. Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates a risk of electric shock from
touching product parts carrying hazardous voltage.
Warning
This symbol is used to indicate safety instructions or to
draw your attention to speci c hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package contents
• Digital radio DIR3020BT
• Power supply unit
• These operating instructions
3. Safety instructions
• The product is intended for private, non-commercial use
only.
• Do not use the product in areas in which electronic
products are not permitted.
• Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
• As with all electrical products, this device should be kept
out of the reach of children.
• Do not drop the product and do not expose it to any
major shocks.
• Do not operate the product outside the power limits
speci ed in the technical data.
• Keep the packaging material out of the reach of children
due to the risk of suffocation.
• Dispose of packaging material immediately in
accordance with the locally applicable regulations.
• Do not modify the device in any way. Doing so voids the
warranty.
• Use the product only for the intended purpose.
• Do not use the product in the immediate vicinity of
heaters, other heat sources or in direct sunlight.
• Do not use the product in a damp environment and
avoid splashing water.
• Only use the article under moderate climatic conditions.
Risk of electric shock
• Do not open the device or continue to operate it if it
becomes damaged.
• Do not use the product if the
AC adapter, the adapter cable or the mains cable are
damaged.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to quali ed
experts.
4. Before commissioning
Note
A detailed description of the
UNDOK app and all of its
functions can be found in our
UNDOK guide at:
www.hama.com - > 00054873 - > Downloads
Setting up a network connection
WLAN (wireless network)
• Ensure the router is switched on, is functioning correctly
and that there is a connection to the Internet.
• Activate your router's WLAN function.
• To ensure the correct functioning of your WLAN
connection, follow your router's operating instructions.
• Then proceed as described under point 5, "Getting
started".
5. Getting started
Note - optimising reception
Please note:
• Always pull the antenna out completely.
• We recommend you adjust the antenna vertically to
ensure optimal reception.
3