Mounting and commissioning
A 1 Mount the screw to the wall.
2 Fit the control unit.
3 Fixate the control unit by screwing the bot-
tom lug to the wall.
18
1.
Open the control unit.
2.
Mount the control unit to the wall (A or B).
3.
Connect the control unit electrically (chapter 6.3, page 19).
– German –
B Drill the fixing holes in the bottom
part with a Ø 5 mm drill.
Mount the bottom part to the wall
with the screws shipped with the
unit.
ÖWWG 3