Daily Use; Residual Heat Indicator; Automatic Heat Up; The Heat Setting - Leonard LAI6001F Benutzerinformation

5. DAILY USE

WARNING!
Refer to Safety chapters.
5.1 Activating and deactivating
Touch for 1 second to activate or
deactivate the hob.
5.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you
activate the hob,
• you spill something or put something on
the control panel for more than 10
seconds (a pan, a cloth, etc.). An acoustic
signal sounds and the hob deactivates.
Remove the object or clean the control
panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking zone
cool down before you use the hob again.
• you use incorrect cookware. The symbol
comes on and the cooking zone
deactivates automatically after 2 minutes.
• you do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the hob deactivates.
The relation between the heat setting and
the time after which the hob deactivates:
Heat setting
, 1 - 2
3 - 4
5
6 - 9

5.3 The heat setting

Touch to increase the heat setting. Touch
to decrease the heat setting. Touch
The hob deactivates
after
6 hours
5 hours
4 hours
1.5 hour
and at the same time to deactivate the
cooking zone.

5.4 Residual heat indicator

WARNING!
As long as the indicator is on, there is
a risk of burns from residual heat.
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware. The
glass ceramic is heated by the heat of the
cookware.
The indicator appears when a cooking
zone is hot.
The indicator may also appear:
• for the neighbouring cooking zones even if
you are not using them,
• when hot cookware is placed on cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the cooking
zone has cooled down.

5.5 Automatic Heat Up

If you activate this function you can get a
necessary heat setting in a shorter time. The
function sets the highest heat setting for
some time and then decreases to the correct
heat setting.
To activate the function the cooking
zone must be cold.
To activate the function for a cooking
zone: touch (
touch ( comes on). Immediately touch
until the correct heat setting comes on.
After 3 seconds comes on.
To deactivate the function: touch
To activate the function for a cooking
zone if there is no
comes on). Immediately
.
on the display: touch
ENGLISH 9