Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1 .
Vibro-pneumatic chisel
2 .
Vibro-chisel basic
3 .
Vibro-chisel with 12.5 mm (1/2") square seat and hexagon 19 mm
4 .
Vibro-chisel with round stamp Ø 25 mm
5 .
Vibro-chisel with round stamp Ø 25 mm and halfrounded drag link breaker hammer
6 .
Vibro-chisel with halfrounded drag link breaker hammer 70 x 40 mm
2 + 7.
Vibro-chisel with rounded drag link breaker hammer 38 mm
2 + 8 .
Vibro-chisel with rounded drag link breaker hammer 74 mm
•
When loosening nuts and screw connections which have rusted tight
•
For pressing the supporting joint cone out of the rear axle
•
With rust solvents, since they penetrate deeper due to the vibration
•
Incl. compressed air nipple 1/4"
•
With quick-action chuck
•
With backlash damping
•
Stroke rate: 2100/min.
•
Chisel shaft: around 10 mm
•
Working stroke: 10 mm
•
Working pressure: 6.2 bar
•
Feature:
Design to loose tight connections. The high performance air hammer helps to disassemble e.g.
conical. Seat connection, wheel bearing, bushes, rusted screw connections.
GENERAL SAFETY
Please read, understand and obey all information and warning notices within this manual before using
the tool for the first time. Disregarding may lead to injuries and/or physical damages and revokes the
guarantee.
1.
This air hammer is a part of a high pressure system. Do not exceed maximum operating pressure
of the air tool ( 90 PSI – 6,2 bar ). The hammer could explode and result in death or serious injury.
2.
Disconnect the air drill from air compressor before changing tools or accessories, servicing and
during nonoperation.
3.
Always wear safety glasses and use hearing protection during operation.
4.
Do not wear loose fitting clothing and jewelry which may become caught in moving parts and
result in serious injury.
5.
Do not depress trigger when connecting the air hose.
6.
Never trigger the tool when not applied to a work object. Accessories must be securely attached.
7.
Make sure spring retainer and all connections are secure and check air hoses for weak or worn
condition before each use.
8.
WARNING !!! Disconnect air supply before installing or any maintenance.
6
Werbung
