Important Safety Instructions; Before Use - Makita DX06 Gebrauchsanleitung

ENGLISH
(Original instructions)
1 Switch trigger
2 Attachment (Dust collection
system)
3 Release button
4 Stroke adjusting button
5 Depth gauge button
6 Depth gauge button carriage
7 Distance (X) equal to the drilling
depth
Specifications
Suction performance
Rated voltage
Operating stroke
Suitable hammer drill bit
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
Symbols
The following show the symbols used for the equipment. Be sure that you understand their meaning before use.
• Take particular care and attention.
• Read instruction manual.
• Only for EU countries
Do not dispose of electric equipment or battery pack together with household waste material!
In observance of the European Directives, on Waste Electric and Electronic Equipment and
Batteries and Accumulators and Waste Batteries and Accumulators and their implementation in
accordance with national laws, electric equipment and batteries and battery pack(s) that have
reached the end of their life must be collected separately and returned to an environmentally
compatible recycling facility.

IMPORTANT SAFETY INSTRUCTIONS

WARNING! Read all safety warnings and all instructions before operating the attachment. Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
1. Use the attachment in accordance with these instructions. Use of the attachment for operations different from
those intended could result in a hazardous situation.
2. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
3. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
4. Always wear eye and respiratory protections.

BEFORE USE

Installing or removing the dust collection system
WARNING:
• Always be sure that the tool is switched off and battery cartridge is removed before carrying out any work
on the tool. Failure to switch off and remove the battery cartridge may result in serious personal injury from
accidental start-up.
Explanation of general view
8 Dust case release button
9 Dust case
10 Filter cover
11 Slit
12 Filter
13 Sealing cap
14 Nozzle
15 Dial
16 Cube hook
Model
Net weight
17 Release hole
18 Nozzle head
19 Cube hooks
20 Receptacles
21 Recessed surface
22 Receptacle
23 Rims
24 Rubber edges
DX06
350 l/min
1.5 kg
18 V
96 mm MAX
24 mm MAX
DX07
1.5 kg
5