Makita DHR242 Betriebsanleitung Seite 6

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Indicator lamps
5 Check button
6 Switch trigger
7 Reversing switch lever
8 Quick change chuck for
SDS-plus
9 Change cover line
10 Change cover
11 Spindle
SPECIFICATIONS
Model
Capacities
Concrete ................................................................................... 24 mm
Steel ......................................................................................... 13 mm
Wood ........................................................................................ 27 mm
–1
No load speed (min ) ................................................................. 0 – 950
Blows per minute ......................................................................... 0 – 4,700
Overall length .............................................................................. 328 mm
Net weight ................................................................................... 3.1 – 3.8 kg
Rated voltage .............................................................................. D.C. 18 V
Optional accessory
Model
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of resi-
dence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and
chargers may cause injury and/or fire.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
General power tool safety warnings
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
6
Explanation of general view
12 Quick change drill chuck
13 Rotation with hammering
14 Lock button
15 Action mode changing knob
16 Rotation only
17 Hammering only
18 Protrusion
19 Groove
20 Loosen
21 Tighten
22 Side grip
23 Bit shank
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / DC18SH / DC18WC
ENE043-1
GEA010-2
24 Bit grease
25 Bit
26 Chuck cover
27
28 Hole
29 Depth gauge
30 Dust cup
31 Blow-out bulb
32 Chuck adapter
33 Keyless drill chuck
34 Sleeve
35 Ring
DHR242
DX01/DX06
(For DHR242)
Save all warnings and instructions for future refer-
ence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
CORDLESS ROTARY HAMMER SAFETY
WARNINGS
Safety instructions for all operations
1. Wear ear protectors. Exposure to noise can cause
hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
symbol
O
DHR243
24 mm
13 mm
27 mm
0 – 950
0 – 4,700
353 mm
3.2 – 3.7 kg
D.C. 18 V
DX02/DX07
(For DHR243)
GEB246-1