Makita DHR242 Betriebsanleitung Seite 12

Model DHR243
Work Vibration
mode emission
Hammer
drilling into
15.8 m/s
concrete
(a )
h, HD
Hammer
drilling into
concrete 14.4 m/s
with DX02
(a )
h, HD
Hammer
drilling into
concrete 14.4 m/s
with DX07
(a )
h, HD
Chiselling
11.2 m/s
(a )
h, CHeq
NOTE:
• The declared vibration total value(s) has been mea-
sured in accordance with a standard test method and
may be used for comparing one tool with another.
• The declared vibration total value(s) may also be used
in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared value(s)
depending on the ways in which the tool is used
especially what kind of workpiece is processed.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of expo-
sure in the actual conditions of use (taking account
of all parts of the operating cycle such as the times
when the tool is switched off and when it is running
idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
12
Uncer- Applicable
tainty (K) standard
2 2
1.5 m/s EN62841-2-6
2 2
1.5 m/s EN62841-2-6
2 2
1.5 m/s EN62841-2-6
2 2
1.5 m/s EN62841-2-6
ENG901-2