Troubleshooting; Conditions Of Warranty - Tectro Td 210 Gebrauchsanweisung

4
58
¡ ¢ £ ¤ ¥ ¦ § ¨ ©  § §    ¢   ! "
TROUBLE SHOOTING
Problem Cause
The powercord is not connected.
The unit does not work. The water container is full.
The water container has not
been replaced correctly.
The air filter is clogged.
The device does not
The temperature or relative
dehumidify.
humidity in the room where the
device is operating is too low.
The room is too large.
The dehumidifier works,
but reduces the relative There are too many sources of
humidity insufficiently. humidity.
There is too much ventilation.

CONDITIONS OF WARRANTY

or manufacturing defects will be repaired free of charge.
stamped purchase receipt.
Solution
Insert the plug into the wall
outlet.
Remove the water from the
container.
Place the water container in the
correct position.
Clean the air filter.
It is normal that the device does
not dehumidify in these
conditions.
We recommend using a
dehumidifier with a greater
capacity.
We recommend using a
dehumidifier with a greater
capacity.
Reduce ventilation (e.g. close
curtains and shut doors).
¦   ¨   § § §   ¨