Hama 00176613 Bedienungsanleitung Seite 3

Speci cations in accordance with
Regulation (EU) 2019/1782
Manufacturer's
name or trade
mark, commercial
registration number
and address
Model identi er
Input voltage
Input AC frequency
Output voltage /
Output current /
Output power
Average active
e ciency
E ciency at low load
(10 %)
No-load power
consumption
5. Getting started and operation
Warning
• Only operate the product from a socket that has
been approved for the device. The socket must
be installed close to the product and must be
easily accessible.
• Disconnect the product from the power supply
using the On/Off switch – if this is not available,
unplug the power cord from the socket.
• If using a multi-socket power strip, make
sure that the total power consumption of all
connected devices does not exceed the power
strip's maximum throughput rating.
• If you will not be using the product for a
prolonged period, disconnect it from mains
power.
Hama, HRA12159,
Dresdner Str. 9,
86653 Monheim
GTA92-0501000EU
100-240 V
50/60 Hz
5.0 V DC / 1.0 A /
5.0 W
73.6 %
63.9 %
0.09 W
Here's how easy it is:
Download the app
• Download the Hama Smart Home (Solution)
APP from the Apple App Store or Google Play
Store.
• Open the Hama Smart Home (Solution) APP.
• The rst time you use the app, you need to
register and create a new account. If you already
have an account, log in with your access details.
• Follow the instructions in the app.
Note
A detailed description of the
Hama Smart Home (Solution) App
and its full scope of functions can be found in our
App Guide at:
www.hama.com ð Article Number ð Downloads
ð App Operating Instructions
Note: Pairing restart
First remove the rubber protection on one side of
the camera. Now press the Reset button with a pin
(or similar thin object) until you hear an acoustic
signal. As soon as the LED begins to ash red, you
can make another pairing attempt.
6. Care and Maintenance
Note
Disconnect the product from the mains before
cleaning it or if it is not going to be used for a
long period of time.
• Only clean this product with a slightly damp,
lint-free cloth and do not use aggressive cleaning
agents.
• Make sure that water does not get into the
product.
3