clearaudio electronic nano phono V2 Bedienungsanleitung Seite 7

User manual / Bedienungsanleitung
nano phono V2 / nano
3. The next step is to connect the ground wire of the turntable/tonearm with the
phono headphone V2
. Make sure that the gain control is set to its lowest volume before connecting
nano phono V2 / nano phono headphone V2
the to your MC/MM cartridge and preamplifier.
4. The very last thing to do is to connect the power supply to the mains and press the power button
to the "ON" position.
Pic. 4: Rear view
- Attention -
nano phono V2 / nano phono headphone V2
Never cover or put anything on top of the as this could
lead to overheating of electronic parts.
If the unit a longer time not in use, please press the button on top of the device. If the device is not
in use, disconnect it completely from the power supply by removing the main plug from the socket.
Pic. 5: On/Off button
Clearaudio wish you a lot of pleasure listening to music!
Made in Germany Page / Seite 7