Unitec W194-1 Bedienungsanleitung Seite 23

• Click to select "CITY 1", "CITY 2", "CITY 3" or
"CITY 4" on the top of the program
• Click [SET LOCATION] to select the location
• Click [SAVE] to save & exit the setting. The PC
program will automatically update the 4-day
forecast of your selected city from the Internet
• To view the weather forecast of your preset city
list, click the corresponding city number
Note: The forecast information of city 1, 2, 3 & 4
will not be sent to your main unit.
313500.00_W194-1_Manual.indd 23
UPDATE FORECAST
Click [UPDATE FORECAST] to manually receive
4-day forecast from the Internet of your selected
city.
TROUBLESHOOTING
1. Ensure that you are using Windows 2000, XP or
Vista and your PC is connected to the Internet.
Try browsing through a couple of websites to
make sure. During the CD installation, if the pro-
gram detected that Microsoft .NET Framework
2.0 driver was not installed in your Windows be-
fore, it will prompt you to install the driver. Follow
the instruction to install the driver and complete
the rest of the installation.
2. Ensure that the USB transmitter is properly
connected to the USB port of your PC. Other-
wise, you are unable to run the PC program
and access the 4-day forecast update from the
Internet.
3. Ensure all batteries in the main unit & USB
transmitter are fresh. Replace battery when the
respective low battery indicator appears on the
main unit (refer "LOW BATTERY INDICATION"
section).
4. If the toolbar icon
disappears (not hidden) on the lower right of
your Window, your program is terminated
and no longer access 4-day forecast from
the Internet. Restart the program again.
5. In the irst few minutes of the RF reception from
USB transmitter, the main unit is showing data
on one part of the screen and this is normal.
The rest of the screen display data will gradually
appears in the next 10 minutes or more. If you
have waited 1 hour or more without seeing the
rest of the screen, shorten the distance between
the USB transmitter & main unit and check the
battery levels. Then repeat the setup procedure
in "ESTABLISH RF CONNECTION WITH MAIN
UINIT" section. If it continues to fail, try removing
the USB connection and all batteries from the
USB transmitter. Reinstall the batteries and then
reconnect the USB connection again. Repeat the
setup procedure in "ESTABLISH RF CONNEC-
TION WITH MAIN UINIT" section.
6. If the RF indicator is showing full strength
but one or more of the next 3 days' forecast is
missing on the main unit & PC program, your PC
may be ofline for many days. Connect your PC
to the Internet again to receive the latest forecast
update.
7. If all forecast information appears except the
UV Index, your PC may be ofline for more than
1 day. Connect your PC to the Internet again to
receive the latest UVI forecast update.
23
of the PC program
English
15.06.12 11:19