Weinberger 40345 Bedienungsanleitung Seite 18

Press "ALARM" button and handle for 2 seconds to enter the Alarm setup mode
Press "+" button to choose 12/24 hours
Press " " button to switch C/F
Press " " and handle for 2 seconds to enter the RCC receive mode
Press "MAX/MIN" button to view the temperature and humidity of the
maximum/minimum value
Press "MAX/MIN" button and handle for 2 seconds, remove all historical records
of temperature/ humidity
Press "KANAL" key, choose RF channel, the display order is CH1 - CH2 -CH3 - CH1
Press "KANAL" button more than 2 seconds to register channel
In RCC receiving mold, press: "
RCC receive mode
When alarm sounds, press the SNOOZE button to trigger snooze for 5 minutes. The
alarm icon flashes when the snooze feature is active.
To set Clock / Date:
Press "SET" button and handle for 2 seconds, enter the time setting mode
The project will flicker at a frequency of 1HZ
Set the following order: year, month, day, hour, minutes, OFFSET, after the set
finish, exit set up mode
Set finish, click "SET" to exit
Press "+" button, set the value of next step, press and handle for 2 seconds, set
the value will 8 times than normal speed.
Press by the "
2 seconds, set the value will 8 times than normal speed.
Moon Phase indication and week indication follow with month and day change
When 8 seconds without any operate, exit the setting mode
automatically, the setting values will be stored
TIME ALARM:
Press "ALARM" button and handle for 2 seconds to enter the alarm mode
The project will flicker at a frequency of 1HZ
Set turns following order: hours, minute.
-" button, set the value of a step back, press and handle for
" and handle for 2 seconds to exit the
18