Guide De Montage - OOGarden 0566-0011 Gebrauchsanleitung

sembly the handle

3. GUIDE DE MONTAGE

Lire les instructions et le manuel dans leur intégralité avant d'essayer d'assembler ou de mettre en marche
Remove packaging material from the box.
l'appareil.
ENLEVER LE NETTOYEUR HAUTE PRESSION DU CARTON
ASSEMBLY
Fix the top handle onto the mac hine by
ASSEMBLY
Cet appareil doit être assemblé avant utilisation.
inserting the handle on top of the upper handle.
Retirer l'appareil du carton et vérifier le carton consciencieusement pour ne pas perdre d'éventuelles
ASSEMBLY
pièces détachées supplémentaires.
Secure the handle in place wi t h 2 screws.
Vérifier que le produit est complet et en bon état.
Si le produit est abîmé, ne pas l'utiliser car il peut présenter des risques lors de son utilisation.
Contacter le SAV OOGarden.
Eloigner les Jeunes enfants des composants d'emballage qui peuvent présenter des risques
(notamment d'étouffement pour les sacs en plastique).
1
1
ASSEMBLAGE DU PRODUIT :
Étape 1 :
1
• Assemblez la poignée.
• Retirez le matériel d'emballage de la boîte.
• Fixez la poignée sur la machine en insérant d'abord la poignée
dans les deux poches situées sur le dessus de la machine. Ensuite, à
2
l'aide des 4 vis, fixez la poignée en place.
de the gun storage on to the side of the
2
Étape 2 :
2
achine.
• AAssemblez le rangement du pistolet (2).
• Faites glisser le rangement du pistolet sur le côté de la machine.
Étape 3 :
3
• Connectez le tuyau et le pistolet de pulvérisation.
3
• Vissez fermement le tuyau à haute pression (3) dans le pistolet de
pulvérisation (10).
3
ASSEMBLY
Étape 4 :
4
• Adaptez la lance au pistolet de pulvérisation.
• Insérez la lance ajustable (9) ou la lance rotative (8) au pistolet
de pulvérisation (10) et tournez d'un quart de tour pour bloquer en
position.
5
IM_0566-0011_V00-230821
WARNING
- Pull out the power plug before carrying out
any work on the equipment, and use only original parts.
WARNING
- Pull out the power plug before carrying out
Before starting any cleaning task, it is important to
any work on the equipment, and use only original parts.
inspect the area for objects that could create a hazard.
WARNING
- Pull out the power plug before carrying out
Before starting any cleaning task, it is important to
Remove any objects from the work area that could be
any work on the equipment, and use only original parts.
inspect the area for objects that could create a hazard.
tripped over, such as toys or outdoor furniture. Ensure
Remove any objects from the work area that could be
that all doors and windows are closed tightly.
Before starting any cleaning task, it is important to
tripped over, such as toys or outdoor furniture. Ensure
inspect the area for objects that could create a hazard.
that all doors and windows are closed tightly.
Remove any objects from the work area that could be
Assembly the handle
tripped over, such as toys or outdoor furniture. Ensure
that all doors and windows are closed tightly.
i. Remove packaging material from the box.
Assembly the handle
ii. Fix the top handle onto the mac hine by
i. Remove packaging material from the box.
inserting the handle on top of the upper handle.
Assembly the handle
ii. Fix the top handle onto the mac hine by
Secure the handle in place wi t h 2 screws.
i. Remove packaging material from the box.
inserting the handle on top of the upper handle.
Secure the handle in place wi t h 2 screws.
ii. Fix the top handle onto the mac hine by
inserting the handle on top of the upper handle.
Secure the handle in place wi t h 2 screws.
Assembling gun storage (2)
Slide the gun storage on to the side of the
Assembling gun storage (2)
machine.
Slide the gun storage on to the side of the
Assembling gun storage (2)
machine.
Slide the gun storage on to the side of the
machine.
Connecting the hose and spray gun.
Sc rew the high p ressu re hose (3) rmly onto the
Connecting the hose and spray gun.
spray gun (10).
Sc rew the high p ressu re hose (3) rmly onto the
Connecting the hose and spray gun.
spray gun (10).
Sc rew the high p ressu re hose (3) rmly onto the
spray gun (10).
Fit the lance to spray gun.
Insert the adjustab le spr ay lance (9) or turbo
lance (8) to spray gun (10), and twist 1/4 tu
lock in position.
Connecting the hose and pressure washer.
rn to
11
11
11
FR
9