Cooking With The Program Function; The Cooking Process Has Ended - TEKNIHALL AF2 Original Bedienungsanleitung

Cooking with the program function

There are 6 programs available with
pre-programmed time and temperature.
The illustration below shows the
setting "Shrimp" 12
1.
after turning the appliance on,
to switch between the programs
(11 to 16).
The cooking time and / or the
temperature can be changed at
any time as required, as described under
Manual preselection of the cooking
time and temperature before and during operation.
If no further operation takes place after the program selection, the

The cooking process has ended

When the time has elapsed, short beeps sound and the
10 for approximately two seconds. The fan will continue to turn
for a short while.
1. Unplug the appliance.
2. Remove the slide-in unit 1 using the handle 2 from the appliance
and place it on a heat-resistant surface.
3. Remove the food from the slide-in unit.
.
21
19
13
12
11
10
17
14
15
16
18
21