Technical Data; Before Starting The Equipment - Zgonc 410-33 Originalbetriebsanleitung

The details and designations of the
•
Ordinance on Hazardous Substances,
which are displayed on the outer pack-
aging of the processed material, must
be observed.
Additional protective measures are to be
•
undertaken if necessary, particularly the
wearing of suitable clothing and masks.
Do not smoke during the spraying pro-
•
cess and/or in the work area. There is a
risk of explosion! Paint vapors are easily
combustible.
Never set up or operate the equipment
•
in the vicinity of a fire place, open lights
or sparking machines.
Do not store or eat food and drink in the
•
work area. Paint vapors are harmful to
your health.
The work area must exceed 30 m
•
sufficient ventilation must be ensured
during spraying and drying. Do not spray
against the wind. Always adhere to the
regulations of the local police authority
when spraying combustible or hazard-
ous materials.
Do not process media such as white
•
spirit, butyl alcohol and methylene chlo-
ride with the PVC pressure hose. These
media will destroy the pressure hose.
Operating pressure vessels
You must keep your pressure vessel in
•
good working order, operate the ves-
sel correctly, monitor the vessel, carry
out necessary maintenance and repair
work immediately and meet the relevant
safety precautions.
The supervisory authority may enforce
•
essential control measures in individual
cases.
A pressure vessel is not allowed to be
•
used if it has faults or deficiencies that
can endanger workers or third parties.
Check the pressure vessel for signs
•
of rust and damage each time before
using. Do not use the compressor with
a damaged or rusty pressure vessel. If
you discover any damage, then please
contact the customer service workshop.
Do not lose these safety instructions.
All manuals and user guides at all-guides.com
and
3

6. TECHNICAL DATA

Mains connection
Motor rating W
Operating mode
Compressor speed min
Pressure vessel capacity
(in liters)
Operating pressure
Theoretical intake
capacity (l/min)
Sound power level L
WA
Uncertainty K
WA
Protection type
Weight of the unit in kg
Max. altitude
(above mean sea level)
The noise emission values were meas-
ured in accordance with EN ISO 2151.
Wear hearing protection.
The effects of noise can cause a loss of
hearing.
7. Before starting the equip-
ment
Before you connect the equipment to the
mains supply make sure that the data on
the rating plate are identical to the mains
data.
Check the equipment for damage which
•
may have occurred in transit. Report any
damage immediately to the transport
company which was used to deliver the
compressor.
Install the compressor near the point of
•
consumption.
Avoid long air lines and supply lines (ex-
•
tension cables).
Make sure that the intake air is dry and
•
dustfree.
Do not install the compressor in a damp
•
or wet room.
230 V~ / 50
Hz
1500
S3 25%
3750
-1
50
approx. 10
bar
approx. 180
95 dB(A)
3 dB
IP20
21
1000 m
GB 19