Operation Panel; Cleaning And Maintenance - Ayce PTC-1919 Gebrauchsanweisung

OPERATION PANEL

1
2
3
4
1 Temperature/Timer up
3 ON/OFF switch
5 Turn button: Oscillation
OPERATION
1. Plug the power cord into a standard 230V AC electrical outlet.
2. Turn on the main switch at back side of heater and at this time the product display will
have a symbol blink.
3. Press " " button to start the heater and press "MODE" button to change the mode,
each pressing on the MODE button, the heater will have one dots(fan only mode),two
dots(1 setting mode) or 3 dots(2 setting mode) showing on display.
4. Press "TURN" button, the heater will turn automatically with an angle about 75°.
All manuals and user guides at all-guides.com
5
2 Temperature/Timer down
4 Mode button: To choose Regular Fan/Warm
Fan/Hot Fan Press 5s to set the timer
5. Press " " or " " button, setting the temperature you need (16-37°C).
6. Press "MODE" button for 5 seconds, display shows timer, press "
set the timer you need to auto power off the heater(up to 9 hours), the display will flash
3 times to finish the setting.
7. The product will keep running a few seconds after turning off.
8. If there is no operation to the keys within 100 seconds, the screen will turn to dark
automatically.

CLEANING AND MAINTENANCE

1. Always disconnect the appliance and let it cool down completely before carrying out
any maintenance.
2. Use a vacuum cleaner to remove dust on inlet and outlet surfaces.
3. Clean the outside of the unit with a damp cloth and then dry it with a dry cloth. Never
immerse the unit in water, nor let water drip into the unit.
STORING
1. Always disconnect the appliance, let it completely cool and clean it before storing.
2. If you do not use the device for a long period, put back the unit and the instruction
manual back into the original carton and store in a dry and ventilated place.
3. Do not place any heavy items on top of carton during storage as this may damage the
appliance.
48 | 49 GB
" or " " button to