Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PARTS DESCRIPTION
1
2
a
1. LED display
A.
ECO function icon
B.
Digits (set temperature / timer /
"beep" function)
C.
°C / °F icon
D.
Stand-by icon
E.
H (hour) / M (minutes) icon
F.
Timer icon
G.
Power level icon
H.
Anti - frost icon
I.
Fan icon
b
c
d
e
f
g
3
4
5
2. Tasten:
a)
On / stand - by button
b)
MODE button
c)
TIMER button
d)
ECO function button
e)
Oscillation button
f)
- button (decrease)
g)
+ button (increase)
3. Filter
4. Back grill
5. Main switch On / Off
OPERATION
1.
Plug into the mains socket.
2.
Turn on the main switch placed on the back of the appliance.
3.
The appliance emits a beep (if "beep" sound is ON). The blinking Stand - By
indicator comes on and remains visible while the appliance is powered.
4.
If the Stand - By indicator is not displayed, be sure that the appliance is on a
horizontal surface.
5.
Press the On / Stand - by
button to turn the appliance on. It begins heating
the room according to the last used settings.
6.
Press the MODE
button to select one of the below operating modes:
• Antifrost function
: the appliance start to work around 10°C
• Fan function (
): the appliance start to work in cool air function
• Power 1:
The appliance work at the minimum heating power level (800W)
• Power 2:
The appliance work at the medium heating power level (1200W)
• Power 3:
The appliance work at the maximum power level (2000W)
7.
To distribute the air flow over a wider surface, press the oscillation Button
it start to swing from right to left and vice versa. To stop the appliance in the
desired position, simply press the oscillation pushbutton again.
8.
To turn off the product press On-Stand-by button
countdown for about 30 seconds. After 30 seconds the appliance will be in
stand - by mode.
9.
To completely turn off the product the main switch must be in "0" position (off).
48 | 49
GB
:
: the display will show a
Werbung
Inhaltsverzeichnis
