Getting Started - Levenhuk Fatum Z500 Bedienungsanleitung

Levenhuk Fatum Z500 Thermo Vision Monocular
EN
Caution! Please remember that mains voltage in most European countries is 220–240V. If you want to use your device
in a country with a different mains voltage standard, remember that use of a converter is absolutely necessary.

Getting started

Charging the device
Connect the power cable to the device and the DC adapter via a USB plug and connect it to the AC power supply.
When using the device for the first time, charge it for at least 4 hours.
Charging voltage and current: 5V, 2A.
Button panel and device settings
POWER button
Press and hold the POWER button for 3 seconds to turn the device on or off.
Standby mode: Press and hold the POWER button until the progress bar is displayed. Release the button before the progress bar is
finished. To wake up the screen, press any button.
Compensation: Turn the device on and then press the POWER button.
Note: Put the lens cover on before completing scene compensation.
PHOTO/VIDEO button
Press the PHOTO/VIDEO button to take a photo and freeze it for 300ms to restore the real-time screen.
Press and hold the PHOTO/VIDEO button to start or finish a video recording.
UP button
Press the UP button for switching to scene mode (Natural/Highlighted/Enhanced).
Press and hold the button to zoom-in the picture.
DOWN button
Press the DOWN button to choose between 6 palettes: Black Hot, White Hot, Red Hot, Iron Red, Blue Hot, Green Hot.
Press and hold the button to zoom-out the picture.
MENU button
1. Press the button once for entering the shortcut menu.
2. Press and hold the button for entering the main menu.
In the menu mode, press the MENU button to confirm the option. Press the UP and DOWN buttons for choosing between the
available options. Press and hold the MENU button to return to the previous option or to exit the menu without saving the current
setting.
HDMI cable
The external interface with a video cable allows you to connect the external power supply and the external screen at the same time
and to output the image of the thermal imaging camera to the external monitor.
Note: The image can be displayed either on the device screen or on the external screen. When you disconnect the HDMI cable, the
image on the device screen will be restored.
Remote Control by Mobile App/Wi-Fi Connection
Before using the remote control of this device, download an app TargetIR from the Apple App Store or from Google Play and install it
on your tablet or smartphone.
1. Turn on the device.
2. Start the app on your smartphone, find account "HandHeld-TI-xxxx", and enter the initial password "12345678".
5