Getting Started - Levenhuk Fatum Z1000 Bedienungsanleitung

Levenhuk Fatum Z1000 Thermo Vision Monocular
EN
Caution! Please remember that mains voltage in most European countries is 220–240V. If you want to use your device
in a country with a different mains voltage standard, remember that use of a converter is absolutely necessary.

Getting started

Charging the device
Connect the power cable to the device and the DC adapter via a USB plug and connect it to the AC power supply.
When using the device for the first time, charge it for at least 4 hours.
Charging voltage and current: 5V, 2A.
Button panel and device settings
Buttons
POWER button
UP button
MENU button
DOWN button
PHOTO/VIDEO button
MENU button
+
DOWN button
MENU button
+
UP button
POWER button
Press and hold the POWER button for 3 seconds to turn the device on or off.
Standby mode: Press and hold the POWER button until the progress bar is displayed. Release the button before the progress bar is
finished. To wake up the screen, press any button.
Compensation: Turn the device on and then press the POWER button.
Note: Put the lens cover on before completing scene compensation.
PHOTO/VIDEO button
Press the PHOTO/VIDEO button to take a photo and freeze it for 300ms to restore the real-time screen.
Press and hold the PHOTO/VIDEO button to start or finish a video recording.
UP button
Press the UP button for switching to scene mode (Natural/Highlighted/Enhanced).
Press and hold the button to zoom-in the picture.
DOWN button
Press the DOWN button to choose between 6 palettes: Black Hot, White Hot, Red Hot, Iron Red, Blue Hot, Green Hot.
Press and hold the button to zoom-out the picture.
Current device status
Power off
Power on
Normal mode
Menu mode
Normal mode
Menu mode
Normal mode
Menu mode
Photo mode
Video mode
Normal mode
Normal mode
Press
/
Compensation
Switch to scene mode
Scroll up
Change the parameters value
Enter the shortcut menu
Enter the submenu
Select the options/parameters
Choose the color palette
Scroll down
Change the parameters value
Take photos
/
/
5
Press and hold
Power on
Standby mode Power off
Zoom-in
/
/
Enter the main menu
Exit the menu/back to the
previous menu
Zoom-out
/
/
Start/finish video recording
Turn on/off the laser indicator
Turn on/off the flashlight