Herunterladen Diese Seite drucken
01.21 · Technische Änderungen vorbehalten · Technical amendments reserved · Modifications techniques réservées
!
Decken- und Wandleuchte
Ceiling and wall luminaire
Plafonnier et applique
Ø 5
30 30
Gebrauchsanweisung
Anwendung
Freistrahlende Leuchte mit hoher Schutzart für
die Montage an Decken und an Wänden.
Eine Leuchte aus Aluminiumdruckguss
und schlagfester Kunststoffabdeckung aus
Polycarbonat.
Für innen und außen.
Produktbeschreibung
Leuchte besteht aus Aluminiumguss
und Edelstahl
Beschichtungstechnologie BEGA Unidure
Schlagfeste Kunststoffabdeckung,
Polycarbonat weiß mit optischer Struktur
Silikondichtung
Reflektor aus eloxiertem Reinstaluminium
2 Befestigungsbohrungen ø 5 mm
Abstand 140 mm
2 Leitungseinführungen zur Durchverdrahtung
der Netzanschlussleitung ø 7-10,5 mm
Anschlussklemme 2,5@
Schutzleiteranschluss
Fassung E 14
Schutzklasse I
Schutzart IP 65
Staubdicht und Schutz gegen Strahlwasser
Schlagfestigkeit IK10
Schutz gegen mechanische
Schläge < 20 Joule
r – Sicherheitszeichen
c  – Konformitätszeichen
Gewicht: 0,8 kg
Sicherheit
Für die Installation und für den Betrieb
dieser Leuchte sind die nationalen
Sicherheitsvorschriften zu beachten.
Die Montage und Inbetriebnahme darf nur
durch eine Elektrofachkraft erfolgen.
Der Hersteller übernimmt keine Haftung für
Schäden, die durch unsachgemäßen Einsatz
oder Montage entstehen.
Werden nachträglich Änderungen an der
Leuchte vorgenommen, so gilt derjenige als
Hersteller, der diese Änderungen vornimmt.
unten
bottom
dessous
30°
Instructions for use
Application
Unshielded luminaire with high protection class
for installation under ceilings and on walls.
A luminaire made of die cast aluminium and
impact resistant synthetic diffuser made of
polycarbonate.
For interior and exterior lighting applications.
Product description
Luminaire made of aluminium alloy
and stainless steel
BEGA Unidure
coating technology
®
®
Impact resistant synthetic diffuser,
polycarbonate white with optical structure
Silicone gasket
Reflector made of pure anodised aluminium
2 mounting holes ø 5 mm
Distance apart 140 mm
2 cable entries for through-wiring of mains
supply cable ø 7-10.5 mm
Connection terminal 2.5@
Earth conductor connection
Lampholder E 14
Safety class I
Protection class IP 65
Dust-tight and protection against water jets
Impact strength IK10
Protection against mechanical
impacts < 20 joule
r – Safety mark
c  – Conformity mark
Weight: 0.8 kg
Safety
The installation and operation of this luminaire
are subject to national safety regulations.
Installation and commissioning may only be
carried out by a qualified electrician.
The manufacturer accepts no liability for
damage caused by improper use or installation.
If subsequent modifications are made to
the luminaire, the person responsible for
these modifications shall be considered the
manufacturer.
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com
200
Fiche d'utilisation
Utilisation
Luminaire à diffusion libre avec un degré de
protection élevé pour le montage au plafonds
et sur des murs.
Un luminaire fabriqué en fonderie d'alu et
vasque en polycarbonate antichocs.
Pour l'intérieur et l'extérieur.
Description du produit
Luminaire fabriqué en fonderie d'aluminium
et acier inoxydable
Technologie de revêtement BEGA Unidure
Vasque synthétique, antichocs,
Polycarbonate blanc à structure optique
Joint silicone
Réflecteur en aluminium pur anodisé
2 trous de fixation ø 5 mm
Entraxe 140 mm
2 entrées de câble pour branchement en
dérivation d'un câble de raccordement
ø 7-10,5 mm
Bornier 2,5@
Raccordement à la terre
Douille E 14
Classe de protection I
Degré de protection IP 65
Etanche à la poussière et protégé contre les
jets d'eau
Résistance aux chocs mécaniques IK10
Protection contre les chocs
mécaniques < 20 joules
r – Sigle de sécurité
c  – Sigle de conformité
Poids: 0,8 kg
Sécurité
Pour l'installation et l'utilisation de ce luminaire,
respecter les normes de sécurité nationales.
L'installation et la mise en service ne doivent
être effectuées que par un électricien agréé.
Le fabricant décline toute responsabilité pour
tout dommage résultant d'une mise en œuvre
ou d'une installation inappropriée du produit.
Si des modifications sont apportées
ultérieurement au luminaire, l'intervenant sera
considéré comme étant le fabricant.
22 501
r
IP 65
40
90
®
1 / 2
loading

Inhaltszusammenfassung für BEGA 22 501

  • Seite 1 Leuchte vorgenommen, so gilt derjenige als manufacturer. considéré comme étant le fabricant. Hersteller, der diese Änderungen vornimmt. BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 1 / 2...
  • Seite 2 63 000 129 Lampholder 63 000 129 Douille 63 000 129 Reflektor 76 000 678 Reflector 76 000 678 Réflecteur 76 000 678 Dichtung 83 000 557 .1 Gasket 83 000 557 .1 Joint 83 000 557 .1 2 / 2 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com...