Foscam 305503000664 Benutzerhandbuch Seite 5

All manuals and user guides at all-guides.com
Wi-Fi connection
1. Plug the smaller end of the USB cable into the Type-C port on the back of the Video
Doorbell, and the larger end into a USB wall charger such as your smart phone charger
(DC5V 1.0A power output recommended for faster charging). Please wait for a few
seconds until you hear "Ready for Wi-Fi configuration".
Please note that it is forbidden to connect the doorbell to AC and Type-C supply at
the same time.
TIPS: If you did not hear the voice prompt, press and hold reset for about 10 seconds to
reset the camera.
2. Make sure that your smart phone is connected to your Wi-Fi router.
TIPS: The camera supports dual-band 2.4GHz and 5GHz Wi-Fi networks, so you can
choose the channel with the stronger signal to use. For example SSID: XXXXX_2.4G or
XXXXX_5G.
3. Open the foscam APP and please register a Foscam account, or sign in if you have one
already.
4. After logging into Foscam APP, select "Tap to add a camera" or "+" icon on the upper
right corner, then select "Scan the QR code" and scan the QR code that labeled at the
bottom of your camera.
Tap + icon select "Scan the code" Scan the QR code
which is located at the
bottom of your camera.
5