Foscam 305503000664 Benutzerhandbuch Seite 14

Optional Install D
With 5°Vertical angle
briket and 15 °Horizontal
angle bracket
STEP 9:
Connect the wires to the two terminals at the back of the doorbell, and then tighten the
terminal screws. Wire can connect to any terminal as the electric current is alternating
current.
NOTE: To prevent short-circuit; make sure the wires are not touching each other after
connecting them to the terminals. If the wires are too short, use the extension wires and
wire nuts provided to make them longer. Use electrical wiring tape to secure the
connection if the wall does not have space for wire nuts.
What are required: Extension Wires and Wire Nuts (Optional) / Video doorbell / Philips-
Head Screwdriver.
All manuals and user guides at all-guides.com
Mounting Screws
14
Optional Install E
Mounting Screws
With Thick mounting briket
This installation method can
be used for Type-C cable for
DC power supply