Clearaudio concept Bedienungsanleitung Seite 8

User manual / Bedienungsanleitung
3.5
Please level the turntable using the level gauge
provided.
All key parameters have been adjusted at the
Clearaudio factory.
3.6
If the bubble of the level gauge is not centered
within the black circle, please turn the turntables
feet clockwise or anti-clockwise until you reach the
perfectly leveled position.
You will only get the best sound from your
turntable if the turntable is perfectly leveled.
3.7
Connect one end of the external power supply
provided to the socket on the rear of the
turntable and the other end to a live AC outlet.
Then connect the tonearm cable to your phonostage
(red plug = right channel, black plug = left channel).
concept
Your turntable is now completely assembled
and ready to play.
Clearaudio is wishing you a lot of pleasure with your new
Page / Seite 8
Pic. 6: Levelling the turntable
concept
Pic. 7: Adjustment of the turntable feet
concept
Pic. 8: Power supply of the turntable
Lock screw
concept
turntable.
© clearaudio electronic GmbH