auna Belle Epoque 1908 Bedienungsanleitung Seite 39

Playing a record
1. To turn the system on, press the POWER button.
2. Press the PHONO button or the FUNCTION button to enter PHONO
mode.
3. Make sure you have removed the needle cover from the needle and
loosened the tone arm latch that secures the tone arm to the tone arm
rest.
4. Set the turntable speed control to the appropriate speed 33, 45 or 78
RPM. If you are playing 45 RPM singles, place the 45 RPM adapter on
the centre spindle.
5. Place the record on the centre spindle.
6. Push the auxiliary lever at the end of the tone arm upwards to lift the
tone arm out of its holder. Move the tone arm to the edge of the record.
The turntable starts automatically. Carefully lower the tone arm onto
the record by pushing down the auxiliary lever at the end of the tone
arm.
7. Adjust the volume control to the desired level.
8. When the tone arm reaches the end of the record, it will stop
automatically.
9. To turn the system off, press the POWER button. The power indicator
goes off.
Note: Do not stop or turn the turntable manually. If you move or shake
the turntable without securing the tone arm clamp, the tone arm may be
damaged.
AUX-IN function
Connect the audio system to an external device via the AUX IN socket on
the rear panel and press the PHONO/AUX IN button or the FUNCTION
button to enter AUX mode. Then start playback on the external device.
EN
39