Product Care; Error Diagnosis - MediaShop Gtech Airram Gebrauchsanleitung

• Do not use it on concrete, tarred or other rough surfaces.
• The brush strip can damage certain floor surfaces. Before vacuuming floors, rugs, or carpets,
review the cleaning instructions recommended by the manufacturer.
• Can damage sensitive fabrics and pillows. Pay special attention to loose woven carpets and
coverings, or items where loose threads are present. If in doubt, test on an inconspicuous area
first.
• The Gtech AirRam is designed to clean a variety of floor surfaces without having to adjust the
settings. However, some surfaces such as delicate loose rugs or carpets, carpet fringes or
damaged carpets with exposed threads are not suited to cleaning with a rotary brush.
• The Gtech AirRam has brush strip which constantly rotates. Never hold the cleaning head in one
place for an extended period of time, as this could damage the floor surface.
WARNING:
• Do not use water, solvents or polishes to clean the device exterior. Wipe it down with a dry cloth
• Never immerse the device in water, and do not wash it in the dishwasher.
• Never use the device without the filter attached.

PRODUCT CARE

Your Gtech AirRam is easy to maintain: keep the filter clean, keep the brush strip clean, and charge the
battery. Wipe it dry with a dry cloth, including the area under the container.

ERROR DIAGNOSIS

The AirRam doesn't clean very well
The AirRam suddenly stopped working or no
longer works
The battery does not charge
If these are not the sources of the problem, do not worry. We're here to help. You can find details of your
local dealer on the back of these operating instructions.
IMPORTANT : LISEZ TOUTES LES INSTRUCTIONS AVANT UTILISATION. CONSERVEZ LA
NOTICE D'UTILISATION POUR TOUTES CONSULTATIONS FUTURES.
N'utilisez pas l'appareil sous la pluie et ne le laissez pas dehors sous la pluie.
ATTENTION : Les précautions de base doivent toujours être suivies avec les appareils
• Empty the container
• Check that the container has been inserted
correctly
• Check that the filter has been inserted correctly
• Clean and/or replace the filter
• Check that the brush strip has been inserted
correctly
• Charge the battery
• Remove any dirt from the brush strip
• Check that the charging cable is properly
connected to the battery and the main power
source
• Check the socket
FR
13