Safety Instructions For Drills - alza Tools AT-CD20V Bedienungsanleitung

SAFETY INSTRUCTIONS
er tool as before the repair.
USE AND MAINTENANCE OF CORDLESS
TOOLS
1. The tool must only be charged with the charger
specified by the manufacturer. A charger that
may be suitable for one type of battery pack
may present a fire hazard when used with an-
other battery pack.
2. The tool must only be used with a battery pack
that is specifically designed for the tool. The
use of any other battery pack may present a risk
of injury or fire.
3. When the battery set is not used, the battery
pack must be protected from contact with oth-
er metal objects, such as paper clips, coins,
keys, nails, screws or other small metal objects
that can cause one battery contact to come into
contact with another. Short-circuiting the bat-
tery terminals may cause burns or fire.

SAFETY INSTRUCTIONS FOR DRILLS

Safety instructions for all work activities
1. Hearing protection must be worn when ham-
mer drilling. Noise exposure can cause hearing
loss.
2. Additional handle(s) must be used. Loss of con-
trol can cause personal injury.
3. The tool must be fully secured before use. This
tool produces a high output torque and with-
out proper locking against the tool during op-
eration, loss of control may occur, which may
result in personal injury.
4. When performing an operation where the drill-
ing tool may touch a hidden guide or its own
power supply, the power tool must be held
by the insulated gripping surfaces. Contact of
the drilling tool with a "live" wire can cause the
uninsulated metal parts of the power tool to
become "live" and lead to an electric shock to
the user.
Safety instructions when using long drills
1. Never use the machine at speeds higher than
the maximum rated drill speed. At higher
speeds, the drill is likely to bend if it is allowed
to rotate freely without being in contact with
the workpiece, which can result in personal in-
jury.
2. Always start at a low speed with the tip of the
drill touching the workpiece. At higher speeds,
6 ENGLISH
the drill is likely to bend if it is allowed to rotate
freely without being in contact with the work-
piece, which can result in personal injury.
3. Only push in a straight line with the drill and do
not apply excessive pressure. Drills can bend
and crack or cause loss of control, which can
result in personal injury.