Inhaltsverzeichnis
Werbung
save before you exit the BIOS setup utility by selecting "Y" in the
"Save & Exit Setup" submenu.
Load from this Bank
To load the setting saved in the bank, move the cursor to "Load
from this Bank" then press <Enter>. The setting in this bank will
replace the current setting. Make sure to save before you exit the
BIOS setup utility by selecting "Y" in the "Save & Exit Setup"
submenu.
Hotkey
You can now load a BIOS setting during system boot up; bypassing
the lengthy process of entering the BIOS utility to load a setting.
Move the cursor to "Hotkey" then press <Enter>. Select the key you
would like to use to load the settings from the bank. When the
system boots up, press the key to load the setting.
2.3 Package Checklist
One LANPARTY 875P-T system board
Two IDE round cables
One floppy round cable
One Serial ATA data cable
One Serial ATA power cable
One I/O shield
One thermal paste
One PC Transpo kit
One FrontX device equipped with:
- 4 diagnostic LEDs
- 1 S/PDIF-out jack
- 1 mini 1394 port
- 1 Serial ATA port
One LANPARTY sticker
One case badge
One UV sleeve
One "Intel ICH5R RAID Driver" diskette
One "Mainboard Utility" CD
One LANPARTY 875P-T User's Manual
2
English
21
Werbung
Inhaltsverzeichnis
