Inhaltsverzeichnis
Werbung
2.2 CMOS Reloaded
CMOS Reloaded allows you to save different configurations and
when needed, allows you to conveniently restore one of these previ-
ously saved configurations.
overclockers who often go through the tiresome trial and error
process of repeatedly changing the BIOS settings to come up with
the most ideal overclocked setting. By being able to save and load
the settings, it eliminates the tedious job of remembering several
settings and/or repeatedly resetting settings during the trial process.
The settings are stored in the SEEPROM. SEEPROM is divided into 5
banks - the backup bank and the 4 user defined banks.
Auto Save Bootable Setting
This field is used to automatically save the last bootable setting from
CMOS to an area in the SEEPROM referred to as the backup bank.
To use this function:
1. Set this field to Enabled.
2. Select "Save & Exit Setup" in the main menu then press <Enter>.
3. Type <Y> then press <Enter>.
If the changes to the setting allowed the system to boot, the setting
will be stored in the SEEPROM. In other words, if the system did not
boot up, the setting will not be stored. You may then follow the
steps in the next section to load the last bootable setting.
Load Last Bootable Setting
If, during the trial and error process, the setting resulted to the
system's instability or worse yet, not being able to boot up the
system, please follow the steps below to use the Load function.
Note:
You can use the Load function only if you have set the "Auto
Save Bootable Setting" to Enabled.
1. If the system did not boot up properly but you were able to
enter the BIOS utility:
a. Select "CMOS Reloaded" in the main menu then press
<Enter>.
CMOS Reloaded is especially helpful to
2
English
19
Werbung
Inhaltsverzeichnis
