Inhaltsverzeichnis
Werbung
2
English
b. Move the cursor to "Load Last Bootable Setting" then press
c. Press <Y> to load the last bootable setting that was stored
2. If you cannot enter the BIOS utility:
a. Use JP3 to clear the CMOS. Refer to chapter 1 for more
b. Enter the BIOS utility then perform steps 1a to 1c.
Saving, Loading and Naming BIOS Settings
For overclockers who require different sets of settings for various
system environments or operating systems, CMOS Reloaded allows
you to save, load and name up to four sets of BIOS settings - in
the "User Defined Setting Bank #1" to "User Defined Setting Bank
#4" fields.
Save Setting to Bank With
This field is used to select the type of setting you would like saved
to a User Defined Setting Bank when you use the "Save to this
Bank" function of that bank.
Current BIOS Setting This option will save the current BIOS setting
Last BIOS Setting
User Defined Setting Bank #1/2/3/4
Bank Description
To name the BIOS setting, move the cursor to "Bank Description"
then press <Enter>. You can enter up to 60 characters. Providing a
name to the BIOS setting will allow you to easily remember the
settings in the bank.
Save to this Bank
To save the BIOS setting, move the cursor to "Save to this Bank"
then press <Enter>. Type <Y> then press <Enter>. This will save the
current setting or the last saved setting to this bank; depending on
the option selected in the "Save Setting to Bank With" field. If you
want to immediately reboot to use the new settings, make sure to
20
"Load".
in the backup bank.
information about clearing CMOS.
to the User Defined Setting Bank.
This option will save the last saved BIOS
setting to the User Defined Setting Bank.
Werbung
Inhaltsverzeichnis
