Vente Unique BOAVISTA Bedienungsanleitung Seite 33

9. Connect the RGB light
Step 3: Fix the power supply on the
beam C with screws K7; Adjust the
light color with the remote control P
after installation.
B1
C
A2
P
Step 2:
Match Sub end of light bar on beam B1
and Female end of light bar on beam C
with Female end and Sub end separately
in controller,then tighten screw cap with
Female end of light bar.
K7
Connect convex of female end
with concave of sub end
Sub end
Step 2
A1
QTY: 1PCS
Step 1:
Connect the sub end of the light bar
on beam B2 with the female end of
the light bar on the beam C, tighten
the cap on sub end of the light bar
and the female end of the light bar;
Except that the connection point of
beam B1 and beam C need not be
connected, other light bars shall be
connected and tightened in clockwise
Female end
order
Female end
Connect convex of female end
with concave of sub end
C
B2
A1
K7
Sub end
Step 1
A2
QTY: 2PCS