Abask J05 Bedienungsanleitung Seite 6

Set up and Installation ：
1. Before installation, please check the camera's normal fun-
ction, and make sure you are using a high-speed Micro SD
card( speed Class 10 or above ), and format the card in the
camera menu at the first use.
2. Use the suction cup mount to install the dash cam on the
windshield. The recommended location is near the inside view
mirror facing front.
3. Adjust the lens angle of the camera, make sure you get the
best coverage over the hood and the road ahead, so you can
record what happens.
4. Connect the camera to the car by the cigarette lighter, hide
the rest of the cable in the gap of the interior trim board.
4