Abask J05 Bedienungsanleitung Seite 13

Date / Time :
and RIGHT button, then press OK to confirm changes,
press MENU button again to exit time setup.
Format :
Format/ delete all data from the Micro SD card.
Restore Setting :
Version :
Check firmware version.
LED Light :
Set up the IR LED lamp working mode for the
inside camera, On/ Off or Auto. In Auto mode, the IR LED
will light when the light inside the car is too dark.
ｆ
Ｖ．１．０
<
Set the time and date by using the LEFT
Reset all settings back to factory default.
>
11